Mini PCs

GMKtec NucBox 5 Rack Mount – Single or Dual, 10 Inch

SKU: GMKTEC-NUCBOX5-SINGLE-10-BLKSold by 3DStore.ai
No reviews yet
$20.79$25.99

20% off on Etsy

Black PETG 10-inch rack mount for GMKtec NucBox 5 / KB5. Choose Single - centered or Dual - side by side. 57.15 mm tall, more than 1U. Mount only. Free US shipping on Etsy.

Fit before you orderFor NucBox 5 / KB5 only. Front panel: 57.15 mm / 2.25 inches tall, more than 1U. Verify clear vertical space and rack-hole alignment before ordering. Allow installation, airflow and rear cable clearance. Other GMKtec models are not covered.

At a glance

Fits
GMKtec NucBox 5
Mount size
254 × 82.5 × 57.15 mm (W × D × H)
Material
PETG
Color
Black

About this item

  • Choose one centered NucBox 5 / KB5 or two PCs side by side.
  • 57.15 mm / 2.25-inch panel height; requires more than a 1U opening.
  • Ventilated floors and side rails, with open top and rear access.
  • Four slotted rack attachment points; use hardware appropriate to your rack.
  • One black PETG mount; computers, cables and rack hardware excluded.

Product overview

Product description

Choose a centered single bay for one GMKtec NucBox 5 (model KB5), or a dual mount for two PCs side by side. Both layouts hold the computers flat in a 10-inch rack. One black PETG mount in your selected layout is included. Computers, power supplies, cables, rack screws and the rack are not included. This is a physical printed mount, not a digital file. CHOOSE YOUR MOUNT LAYOUT • Single - centered: one device bay in the center of the rack panel. • Dual - side by side: two device bays; either bay can be left empty. Images labeled Design preview illustrate the new single-centered layout. The other photos show the existing printed dual mount. CHECK HEIGHT BEFORE ORDERING The front panel is 57.15 mm / 2.25 inches tall—more than a standard 44.45 mm / 1.75-inch 1U opening. It is not a 1U mount. Allow at least 57.15 mm of unobstructed vertical space, plus clearance for installation and airflow, and check rack-hole alignment and nearby equipment before ordering. Overall mount dimensions: 254 mm wide × 82.5 mm deep × 57.15 mm high. Leave additional room behind the mount for cables. COMPATIBILITY Designed for the GMKtec NucBox 5, model KB5. The single layout uses the same device cradle, centered in the rack panel. Our dual photos show a NucBox 5 in one bay with the second bay empty. This listing does not claim compatibility with NucBox G5, G3 or other GMKtec models. DESIGN • One centered cradle or two side-by-side cradles, with ventilated floors and sides • Open top and rear for airflow and cable access • Front power buttons and USB ports remain accessible • Black PETG with four slotted rack attachment points • No keystone openings INSTALLATION Disconnect cables and lower each PC into its cradle from above. Check that it sits flat with all feet supported and that the retaining stops engage. Attach the mount using suitable hardware for your 10-inch rack at all four slots; tighten gently. Support the cables so they do not pull on the PCs, and keep ventilation openings clear. The PCs may need to be removed for side access. This is a stationary rack cradle, not a transport clamp. WHAT YOU RECEIVE One black PETG rack mount in the Single - centered or Dual - side by side layout you select. No computers, power supplies, cables, rack screws, cage nuts or rack are included. Small layer lines and surface variations are normal for 3D-printed PETG. GMKtec is referenced only to identify the compatible device.

Technical details

Product information

Color
Black
Material
PETG
Shipping
Free US shipping; international rates shown on Etsy.
Rack width
10-inch
Mount layout
Single - centered / Dual - side by side
Overall depth
82.5 mm / 3.25 inches
Overall width
254 mm / 10 inches
Overall height
57.15 mm / 2.25 inches
Device capacity
Single (1) / Dual (2)
Compatible model
GMKtec NucBox 5 / KB5
Keystone openings
None
Vertical clearance
More than 1U; allow installation and airflow clearance
Dimensions
254 × 82.5 × 57.15 mm (W × D × H)
SKU
GMKTEC-NUCBOX5-SINGLE-10-BLK

Measure before ordering

Dimensions and fit

254 × 82.5 × 57.15 mm (W × D × H)
Rack width
10-inch
Overall depth
82.5 mm / 3.25 inches
Overall width
254 mm / 10 inches
Overall height
57.15 mm / 2.25 inches
Dimensions
254 × 82.5 × 57.15 mm (W × D × H)
Compare these measurements with your rack and device. If you are unsure, send us a question before ordering.

What's in the box

Here's what comes with it.

Included

  • One black PETG rack mount in the selected single or dual layout

Not included

  • GMKtec mini PCs
  • Power supplies and cables
  • Rack screws and cage nuts
  • Equipment rack

Questions and answers

Questions before you order?

Read common answers or ask us about your exact device and rack.
Are the computers included?

No. You receive one black PETG mount in your selected single or dual layout. Computers, power supplies, cables, rack screws, cage nuts and the rack are excluded.

Does this fit in 1U?

No. The front panel is 57.15 mm / 2.25 inches tall, exceeding a standard 44.45 mm / 1.75-inch 1U opening. Check vertical space, rack-hole alignment and neighboring equipment. Leave extra room for installation, airflow and rear cables.

Which GMKtec models fit?

This mount is designed for the NucBox 5, model KB5. It does not claim compatibility with NucBox G5, G3 or other similarly named models.

Can I use it with one computer?

Yes. Choose Single - centered for one bay in the middle of the rack panel, or Dual - side by side for two bays. Either dual bay can be left empty. Single images are design previews; other photographs show the printed dual mount.

How is it installed?

Disconnect cables and lower each PC into its cradle from above. Check that it sits flat with all feet supported and that the retaining stops engage. Attach the mount using suitable hardware for your 10-inch rack at all four slots; tighten gently. Support the cables so they do not pull on the PCs, and keep ventilation openings clear. The PCs may need to be removed for side access. This is a stationary rack cradle, not a transport clamp.

Is US shipping free?

Yes. Both layouts have free US shipping on Etsy. International rates, when available, are shown at checkout.

Ask about this product

We usually answer questions about fit, measurements, and installation by email.

You may also need

Reviews from customers

What customers say

No reviews yet

If you purchased this item on Etsy, leave your review from Etsy's Purchases and Reviews page.

Review your Etsy purchase

Keep looking

See more from 3DStore.ai.

Shop products →
$20.79Selected: Single - centeredChange optionsChoose on EtsyChoose Single - centered again on Etsy.