Included
- One printed PETG rack mount in the selected color
Rack systems
NETGEAR GS308 / GS308E — 10 Inch 1U Rack Mount
SKU: NETGEAR-GS308-10-1U-BLKSold by 3DStore.ai
New product · No reviews yet$27.99
Mount your NETGEAR GS308 or GS308E in a 10-inch rack with this 1U PETG cradle. Choose Black or White. MOUNT ONLY — the switch, power supply, cables and rack hardware are not included. This is a physical printed part, not a digital file.
FIT AND DESIGN • For NETGEAR GS308 / GS308E compact metal switches • GS308E v4 is shown fitted in our photos • 10-inch rack, 1U format • Front Ethernet ports remain accessible • Open top and rear access for the switch and power cable • Ventilated bottom and side openings • Four slotted rack mounting points • No keystone openings in this version MODEL AND REVISION CHECK This listing uses the same mount fit demonstrated with our GS308E. Published switch heights may use different measurement conventions; do not choose by height alone. Check your exact model/revision, enclosure, feet and rear connections. Other NETGEAR models with a published 158 × 101 mm footprint include GS305EP, GS305EPP, GS308EP, GS308EPP, GS105EP, GS105EPP, GS108EP, GS108EPP, GS108Tv3 (GS108T-300), GS105Pv3, GS105PPv3, GS305P/GS305Pv3, GS305PP, GS308P, GS108Ev3, GS108PEv3, MS305, MS305E, MS308 and MS308E. These are size-reference models, not additional physically tested fit claims. Contact us with your exact revision before ordering for one of these models. Older GS108, GS108Tv2 and original GS108PE enclosures differ; do not assume those fit. WHAT YOU RECEIVE One printed PETG rack mount in your selected color. Photos show Black. Switch, power supply, cables, rack screws/cage nuts and rack are excluded. INSTALLATION Disconnect the switch cables. With the mount outside the rack, lower the switch into the cradle and seat it flat behind the front panel. Check that the rear stops engage and all ports and the power connector remain accessible. Attach using suitable rack hardware at all four slots and tighten gently. Support cables so they do not pull on the switch; keep ventilation openings clear. Made to order in 1–3 business days. Small layer lines and surface variations are normal for 3D-printed PETG. This is an independent 3DStoreAI accessory, not a NETGEAR product.
At a glance
- Fits
- NETGEAR GS308 + NETGEAR GS308E
- Rack space
- 1U
- Overall size
- 10-inch rack width; 1U rack format
- Material
- PETG
About this item
- NETGEAR GS308 / GS308E cradle in a 10-inch, 1U rack format.
- Front Ethernet ports remain accessible.
- Open top and rear access with ventilated bottom and sides.
- Four slotted rack mounting points; rack hardware supplied separately.
- Choose Black or White PETG. Physical printed mount only.
Product overview
Product description
Mount your NETGEAR GS308 or GS308E in a 10-inch rack with this 1U PETG cradle. Choose Black or White. MOUNT ONLY — the switch, power supply, cables and rack hardware are not included. This is a physical printed part, not a digital file.
FIT AND DESIGN
• For NETGEAR GS308 / GS308E compact metal switches
• GS308E v4 is shown fitted in our photos
• 10-inch rack, 1U format
• Front Ethernet ports remain accessible
• Open top and rear access for the switch and power cable
• Ventilated bottom and side openings
• Four slotted rack mounting points
• No keystone openings in this version
MODEL AND REVISION CHECK
This listing uses the same mount fit demonstrated with our GS308E. Published switch heights may use different measurement conventions; do not choose by height alone. Check your exact model/revision, enclosure, feet and rear connections.
Other NETGEAR models with a published 158 × 101 mm footprint include GS305EP, GS305EPP, GS308EP, GS308EPP, GS105EP, GS105EPP, GS108EP, GS108EPP, GS108Tv3 (GS108T-300), GS105Pv3, GS105PPv3, GS305P/GS305Pv3, GS305PP, GS308P, GS108Ev3, GS108PEv3, MS305, MS305E, MS308 and MS308E. These are size-reference models, not additional physically tested fit claims. Contact us with your exact revision before ordering for one of these models. Older GS108, GS108Tv2 and original GS108PE enclosures differ; do not assume those fit.
WHAT YOU RECEIVE
One printed PETG rack mount in your selected color. Photos show Black. Switch, power supply, cables, rack screws/cage nuts and rack are excluded.
INSTALLATION
Disconnect the switch cables. With the mount outside the rack, lower the switch into the cradle and seat it flat behind the front panel. Check that the rear stops engage and all ports and the power connector remain accessible. Attach using suitable rack hardware at all four slots and tighten gently. Support cables so they do not pull on the switch; keep ventilation openings clear.
Made to order in 1–3 business days. Small layer lines and surface variations are normal for 3D-printed PETG. This is an independent 3DStoreAI accessory, not a NETGEAR product.
Technical details
Product information
- Colors
- Black / White
- Material
- PETG
- Rack width
- 10-inch
- Rack height
- 1U
- Keystone openings
- None
- Photographed switch
- NETGEAR GS308E v4
- Primary compatibility
- NETGEAR GS308 / GS308E
- Dimensions
- 10-inch rack width; 1U rack format
- SKU
- NETGEAR-GS308-10-1U-BLK
Measure before ordering
Dimensions and fit
10-inch rack width; 1U rack format- Rack width
- 10-inch
- Rack height
- 1U
- Dimensions
- 10-inch rack width; 1U rack format
What's in the box
Here's what comes with it.
Not included
- NETGEAR switch
- Power supply and cables
- Rack screws and cage nuts
- Equipment rack
Questions and answers
Questions before you order?
Read common answers or ask us about your exact device and rack.Is the NETGEAR switch included?
No. You receive one printed PETG rack mount in your selected color. The switch, power supply, cables, rack screws, cage nuts and rack are not included.
Which switches fit?
This mount is for NETGEAR GS308 / GS308E compact metal switches. Our photos show a fitted GS308E v4. Other models with the same published footprint are listed as size references in the description; check the exact hardware revision, feet, enclosure and rear connections before ordering for another model.
Does it fit a 19-inch rack?
No. This mount is for a 10-inch rack and occupies 1U.
How is the switch installed?
Disconnect the switch cables. With the mount outside the rack, lower the switch into the cradle and seat it flat behind the front panel. Check that the rear stops engage and all ports and the power connector remain accessible. Attach using suitable rack hardware at all four slots and tighten gently. Support cables so they do not pull on the switch; keep ventilation openings clear.
Is this a digital file?
No. This listing is for a physical printed PETG mount, made to order in 1–3 business days.
You may also need
Related products
Rack systemsTP-Link TL-SG108S-M2 - 10 Inch Rack Mount
$27.99In stock
Rack systemsDual 2.5-Inch SSD / HDD Mount | 10-Inch 1U Rack
$27.99In stock
Rack systemsJetKVM + Keystone Rack Mount - 10 Inch Rack - Choose Layout
$22.99In stock
Rack systems40mm Fan Mount — 10 Inch Rack, 1U Open Design
$12.99In stockReviews from customers
What customers say
No reviews yet
If you purchased this item on Etsy, leave your review from Etsy's Purchases and Reviews page.
Review your Etsy purchaseKeep looking